PowerMate
POWERMISCHER-FAMILIE MIT 3 MODELLEN, 10 BIS 22 EINGANGSKANÄLEN, INTEGRIERTEN DIGITALEN EFFEKTEINHEITEN, STEREO-GRAPHIC EQUALIZER UND CLASS-H LEISTUNGSVERSTÄRKERN FÜR PROFESSIONELLE KLANGVERSTÄRKUNG BEI LIVE-ANWENDUNGEN UND AUCH IN FESTINSTALLATIONEN
- Class-D-Hochleistungsverstärker mit 2 x 1.250 Watt pro Kanal (IHF-A) an 4 Ω
- 2 editierbare digitale Effektgeräte mit 100 Presets und jeweils 20 Benutzerspeichern
- Professionelle 4 x IN/4 x OUT digitale Schnittstelle (USB) zum Anschluss an einen PC oder Mac
- Stereo-Equalizer im Masterbereich
- LPN Processing für Lautsprecher mit kleinem bis mittlerem Volumen für druckvolleren Punch und verbesserte Transparenz im gesamten Tief-/Mittelton-Bereich
- Hergestellt in Deutschland
Mit den powermate mischpulten liefert Dynacord erstklassige audioqualität, komponenten und funktionen und steht somit in diesem marktsegment an der spitze.
PowerMate Mischpulte wurden für eine große Bandbreite von Anwendungen entwickelt. Zur Wahl stehen der äußerst kompakte PowerMate 600 und die größeren PowerMate 1000, 1600 und 2200. In allen erfüllt der leistungsstarke und dabei leichte Class-D-Verstärker mit 2 x 1.250 W die höchsten professionellen Audioansprüche.
Produkte
PowerMate 600-3
8‑channel compact power‑mixer
-
DIM 30
<0.05
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105
Power Requirement
100V to 240 VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
161.7
Width
438.8
Depth
362.5
Weight Net
9.5
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Maximum Output Voltage
74 Vrms
Phantom Power
48VDC
Shipping Weight
12
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Maximum SPL
MIC inputs: +11dBu; Mono Line inputs: +31 dBu; Stereo Line inputs: +31dBu; All other inputs: +22dBu; All other outputs: +22dBu
Channels
4
Auxiliarys (MON, FX, AUX)
1 Pre, 1 Post, 1 Pre/Post switchable
CMRR, MIC input, 1 kHz
>80dB
Input Impedances
MIC: 2㏀; CD In: 10㏀; All other inputs: > 15㏀
Output Impedances
Phones: 47Ω; All other outputs (balanced/unbalanced): 150Ω / 75Ω
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down: -100dBu; Master fader 0dB, Channel fader down: -92dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu
Input Connections
6
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking: ±12dB / 2.4kHz; HI Shelving: ±15dB / 12 kHz; Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to 2.5
Filter
LO-CUT, mono inputs: f = 80Hz, 18dB/oct., switchable; Speaker Processing: LPN, switchable
Effects
Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Protection
Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/U
Safety Class
I
Displays
128 x 64 pixels, OLED
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Output Stage Topology, amplifier
Class D
PowerMate 1000-3
10‑channel compact power‑mixer
-
DIM 30
<0.05%
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105dB
Power Requirement
100V to 240VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
164.5
Width
510.5
Depth
571.5
Weight Net
14
Safety Class
I
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Output Stage Topology, amplifier
Class D
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Displays
128 x 64 pixels, OLED
Maximum Output Voltage
74 Vrms
Phantom Power
48VDC
Shipping Weight
17
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Maximum SPL
MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu
Channels
6
Auxiliarys (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
CMRR, MIC input, 1 kHz
>80dB
Input Impedances
MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Output Impedances
Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Filter
LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
Effects
Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Protection
Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
PowerMate 1600-3
16‑channel compact power‑mixer
-
DIM 30
<0.05%
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105dB
Power Requirement
100V to 240VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
164.5
Width
663.5
Depth
571.5
Weight Net
17
Filter
LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Effects
Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Protection
Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
Safety Class
I
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Output Stage Topology, amplifier
Class D
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Displays
128 x 64 pixels, OLED
Maximum Output Voltage
74 Vrms
Phantom Power
48VDC
Shipping Weight
20
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Maximum SPL
MIC inputs: +21 dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu
Channels
12
Auxiliarys (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
CMRR, MIC input, 1 kHz
>80dB
Input Impedances
MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down: -97dBu; Master fader 0dB, Channel fader down: -89dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Output Impedances
Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
PowerMate 2200-3
22‑channel compact power‑mixer
-
DIM 30
<0.05%
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105dB
Power Requirement
100V to 240VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
155
Width
818.5
Depth
498.5
Weight Net
18
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down: -97dBu; Master fader 0dB, Channel fader down: -87dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -81dBu
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Filter
LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
Effects
Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Protection
Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
Safety Class
I
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Output Stage Topology, amplifier
Class D
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Displays
128 x 64 pixels, OLED
Maximum Output Voltage
74 Vrms
Phantom Power
48VDC
Maximum SPL
MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu
Channels
18
Shipping Weight
22
Auxiliarys (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
CMRR, MIC input, 1 kHz
>80dB
Input Impedances
MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Output Impedances
Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
PowerMate 600-3 |
PowerMate 1000-3 |
PowerMate 1600-3 |
PowerMate 2200-3 | |
DIM 30 | <0.05% | <0.05%% | <0.05%% | <0.05%% |
Crosstalk | < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB | < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB | < Amplifier L/R: < -85dB; Channel to Channel: < -80dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB | < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB |
Frequency Response (-3 dB) | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz |
Signal-to-Noise Ratio (A-weighted) | 105dB | 105dBdB | 105dBdB | 105dBdB |
Power Requirement | 100V to 240 VAC, 50Hz to 60Hz | 100V to 240VAC, 50Hz to 60Hz | 100V to 240VAC, 50Hz to 60Hz | 100V to 240VAC, 50Hz to 60Hz |
Power Consumption | 450W | 450W | 450W | 450W |
Cooling | Continuous speed controlled Fans | Continuous speed controlled Fans | Continuous speed controlled Fans | Continuous speed controlled Fans |
Height | 161.7mm (6.37") | 164.5mm (6.48") | 164.5mm (6.48") | 155mm (6.1") |
Width | 438.8mm (17.28") | 510.5mm (20.1") | 663.5mm (26.12") | 818.5mm (32.22") |
Depth | 362.5mm (14.27") | 571.5mm (22.5") | 571.5mm (22.5") | 498.5mm (19.63") |
Weight Net | 9.5kg (20.94 lbs) | 14kg (30.86 lbs) | 17kg (37.48 lbs) | 18kg (39.68 lbs) |
Filter | LO-CUT, mono inputs: f = 80Hz, 18dB/oct., switchable; Speaker Processing: LPN, switchable | LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable | LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable | LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable |
Equivalent Input Noise, MIC input, A-weighted, 150 ohms | -130dBu | -130dBu | -130dBu | -130dBu |
Safety Class | I | I | I | I |
Output Power Control (Speaker Protection) | Adjustable longterm RMS Limiter | Adjustable longterm RMS Limiter | Adjustable longterm RMS Limiter | Adjustable longterm RMS Limiter |
Effects | Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI | Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI | Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI | Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI |
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W |
Noise, Channel inputs to Master A L/R outputs, A-weighted | Master fader down: -100dBu; Master fader 0dB, Channel fader down: -92dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu | Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu | Master fader down: -97dBu; Master fader 0dB, Channel fader down: -89dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu | Master fader down: -97dBu; Master fader 0dB, Channel fader down: -87dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -81dBu |
Digital Audio Interface | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip |
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W |
Equalization | LO Shelving: ±15dB / 60Hz; MID Peaking: ±12dB / 2.4kHz; HI Shelving: ±15dB / 12 kHz; Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to 2.5 | LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to | LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to | LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to |
Total Harmonic Distortion | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% |
MIDI Interface | 5-pin DIN connector, In / Out | 5-pin DIN connector, In / Out | 5-pin DIN connector, In / Out | 5-pin DIN connector, In / Out |
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W |
Protection | Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/U | Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/ | Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/ | Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/ |
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz | <0.15% | <0.15% | <0.15% | <0.15% |
Maximum Output Voltage | 74 Vrms | 74 Vrms | 74 Vrms | 74 Vrms |
Output Stage Topology, amplifier | Class D | Class D | Class D | Class D |
Input Sensitivity | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) |
Phantom Power | 48VDC | 48VDC | 48VDC | 48VDC |
Displays | 128 x 64 pixels, OLED | 128 x 64 pixels, OLED | 128 x 64 pixels, OLED | 128 x 64 pixels, OLED |
Shipping Weight | 12kg (26.46 lbs) | 17kg (37.48 lbs) | 20kg (44.09 lbs) | 22kg (48.5 lbs) |
Operating Temperature Range | +5 °C…+40 °C (40 °F…105 °F) | +5 °C…+40 °C (40 °F…105 °F) | +5 °C…+40 °C (40 °F…105 °F) | +5 °C…+40 °C (40 °F…105 °F) |
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW |
Maximum SPL | MIC inputs: +11dBu; Mono Line inputs: +31 dBu; Stereo Line inputs: +31dBu; All other inputs: +22dBu; All other outputs: +22dBudB | MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB | MIC inputs: +21 dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB | MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB |
Channels | 4 | 6 | 12 | 18 |
Auxiliarys (MON, FX, AUX) | 1 Pre, 1 Post, 1 Pre/Post switchable | 2 Pre, 2 Post, 2 Pre/Post switchable | 2 Pre, 2 Post, 2 Pre/Post switchable | 2 Pre, 2 Post, 2 Pre/Post switchable |
CMRR, MIC input, 1 kHz | >80dB | >80dB | >80dB | >80dB |
Input Impedances | MIC: 2㏀; CD In: 10㏀; All other inputs: > 15㏀ | MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀ | MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀ | MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀ |
Output Impedances | Phones: 47Ω; All other outputs (balanced/unbalanced): 150Ω / 75Ω | Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced) | Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced) | Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced) |
Input Connections | 6 | |||
Erfahren Sie mehr | Erfahren Sie mehr | Erfahren Sie mehr | Erfahren Sie mehr |
Show more specs
Downloads
Garantie & Kundendienst-Programme