C1300FDi

DSP 2 x 650 W Leistungsverstärker für Festinstallationen

Summary & Images Specs Downloads & Support
  • DSP-Verstärker für die Festinstallation, Euroblock Anschlüsse
  • Integrierte Lautsprecher-Signalverarbeitung mit FIR-Drive Technologie
  • Marktführende Audioperformance, solide Bauweise und höchste Zuverlässigkeit.
  • Low Z und 70V Betrieb und Energiespar-Standby-Modus
  • Intuitive, einfache Konfiguration und Bedienung mit SONICUE Sound System Software (mit Firmware 2.0)

Technische Daten

Maximum Output Power, Single Channel 2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) High impedance = 70V Operation = 1 x 625W (Bridge Mode)
Maximum Output Power, Dual Channel 2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance)
Maximum Output Power, Bridged High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W;

Maximum RMS Voltage Swing, THD = 1%, 1kHz 55.3V
Voltage Gain ref.1kHz 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
DIM 30 < 0.05%
Maximum Input Level +21 dBu
Crosstalk < -80dB
Frequency Response 10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced 20kΩ
Signal-to-Noise Ratio (A-weighted) >104dB
Output Noise , A-weighted < -68dBu
Output Stage Topology Class AB
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 550 W
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Safety Class I
Available Color Black
Height 88mm (3.46")
Width 483mm (19.02")
Depth 462.4mm (18.2")
Weight Net 12.9kg (28.44 lbs)
Signal Processing FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
High Impedance Operation 70V (in bridged mode)
Remote Power ON/GPIO Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Operating Temperature Range +5°C to +40°C (40°F to +105°F)
Direct Drive Load Capability Dual Channel: Not Available Bridge Mode 70V Operatoin: 1 x 625 w (0.0 dB) Bridge Mode 100V Operation: Not Available
Remote control SONICUE sound system software (requires firmware 2.0)
Total Harmonic Distortion < 0.05%

Videos

Downloads

Let's talk

Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

  • System Design
  • Installation
  • Programming & Commissioning

Find your local contact

Garantie & Kundendienst-Programme

Similar Products

Compatible Products

sprites_global sprites_ev