DPM UI-1
2ch universal input module
- 109 dB dynamic range – for the best audio performance without disruptive incidental noise
- Symmetrical inputs – high CMRR for avoiding incidental noise from crosstalk over long cables
- Power supply for call stations – monitored with selfresetting fuse
- Automatic configuration – mounting changes/deviations are detected and displayed in IRIS-Net
- Input transformer – transformers (Lundahl LL1531) can be retrofitted as an option
The DPM UI-1 is a 2-channel universal input module for the DPM 8016 PROMATRIX CONTROLLER. The audio signals are connected via screw-in Euroblock connectors. Channel A is a universal MIC/LINE input with programmable input sensitivity and switchable phantom power supply. The second channel can be used either as a LINE input (B) or as a call station input (C). Up to four DPC call stations can be connected to the PCA BUS interface.
Linear, high-precision 24-bit converters are used for the A/D conversion. The internal signal preparation uses a 48-bit name length.
Specifications
| Supply voltage/current | +3.3 V DC, ± 0.3 V / 6 mA +5 V DC, ± 0.3 V / 18 mA +18 V DC, ± 0.5 V / 66 mA -18 V DC, ± 0.5 V / 12 mA +24 V DC/max. 1 A, depends onnumber of connected DPCs+48 V DC, ± 0.5 V / 11 mA |
|||
| Audio inputs | 2 x 3-pin Euroblock connectors, electronically symmetrical | |||
| • Input level (nominal) | +6 dBu/1.55 V | |||
| • Input level (max. beforeclip) | Input A (MIC / LINE): +18 dBu/6.15 V Input B (LINE): +18 dBu/6.15 V Input C (PCA BUS): +12 dBu/3.1V |
|||
| • Input impedance | Input A (MIC / LINE): 2.5 kΩ Input B (LINE): 20 kΩ Input C (PCA BUS): 20 kΩ |
|||
| • Common mode rejection | > 80 dB (f = 1 kHz) | |||
| • Phantom power | +48 V/10 mA, switchable for input A | |||
| • A/D conversion | 24 bit, sigma-delta, 128 times oversampling | |||
Specifications |
||||
| PCA input | Integrated power – CAN – audio interface, RJ-45 | |
| • Power | +24 V DC, electronic fuse | |
| • CAN | 10, 20, or 62.5 kbit/s | |
| • Audio | electronically symmetrical | |
| • Max. length | 1000 m | |
| Frequency response | 20–20,000 Hz (-0.5 dB) | |
| Signal-to-noise ratio (A-weighted) | 109 dB typical | |
| THD+N | < 0.003% | |
| Crosstalk | < -100 dB | |
| SMPTE (DIN 4:1) | < 0.005% (at Ue = +6 dBu) | |
| Sample rate | 48 kHz | |
| Data format | 24-bit linear A/D conversion, 48-bit processing | |
| Operating temperature | -5 °C to +45 °C | |
| Product dimensions (Width by Height by Depth) | 81.8 x 27.3 x 189.3 mm | |
| Net weight | 100 g | |
| Optional accessories | ||
| • Input transformer | Type LL1531, LundahlTransformers, Sweden | |
Let's talk
Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Downloads
Warranty & After Sales Programs
Compatible Products
