Powered Mixers
Models
PM 502
8‑ch compact powered mixer
-
DIM 30
<0.05%
Crosstalk
Amplifier Ch1/Ch2: < -85dB; Channel to channel: < -78dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15–22000Hz; Any input to Speaker output: 20–22000Hz
Signal-to-Noise Ratio (A-weighted)
104
Power Consumption
180W
Cooling
Continuous speed controlled fan
Height
244
Width
395
Depth
241
Weight Net
4.9
Displays
128 x 64 pixels, LCD
Maximum Output Voltage
Dual channel mode: 52Vrms; Direct Drive mode: 100Vrms
Phantom Power
48VDC
Shipping Weight
6.4
Output Stage Topology, amplifier
Class D
Operating Temperature Range
5° to 40°C (40° to 105°F)
Max. dual channel output power, dynamic headroom, IHF-A
into 4Ω: 2 x 600W; into 8Ω: 2 x 340W;
Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1%
into 12Ω: 680W
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 400W; into 8Ω: 240W
Transducer
dBu, typical
Microphone mute switch attenuation
>100dB
Channels
5
Channel VOL and FX/AUX send attenuation
>85dB
Auxiliarys (MON, FX, AUX)
1 Post, 1 Pre
Max. level, mixing desk, input VOL down, output VOL up
MIC inputs, GAIN @ min. position: +11dBu; Mono line inputs, GAIN @ min. position: +30 dBu; Stereo line inputs: +26dBu; PHONES output: +21dBu; MASTER A, B, AUX outputs: +11dBu
CMRR, MIC input, 1 kHz
>80dB
Master EQ 7-band (63, 160, 400, 1k, 2.5k, 6k, 12k Hz)
±10dB / Q =1.5
Input Impedances
MIC: 2㏀; CD: 10㏀; All other inputs: > 15㏀
Delay MASTER B, selectable
0–145ms (0–50m)
Output Impedances
PHONES: 47Ω; All other outputs (impedance balanced): 150Ω
Audio player (USB at front panel)
Switching mode power supply (μC controlled): FAT 32; Supported audio file formats: MP3, WAV; Interface: USB2.0, female type A; USB power supply, max. rated current (short circuit proof): 5 V, 500 mA;
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-129dBu
AC power input
100–240VAC, 50–60Hz
Noise, Channel inputs to Master A L/R outputs, A-weighted
MASTER VOLUME down: -99dBu; MASTER VOLUME center, all channel volume down: -90dBu; MASTER VOLUME center, all channel volume center: -85dBu
Equalization
Low shelving filter: ±15dB / 60Hz; Mid peak filter: ±12dB / 2.4kHz; High shelving filter: ±15dB / 12kHz
Filter
Low-cut filter, microphone processing (switchable): 80Hz, 18dB/oct. or 150Hz, 12 dB/oct; Low-cut filter, amplifier (engaged in Direct Drive mode): 50Hz or 70Hz, 18dB/oct; Speaker processing: LPN, switchable
Effects
Type: Stereo 24/48-bit multi effects processor; Effect presets: 32 factory presets, user editable; Remote control: Footswitch
Digital Audio Interface
Channels: 2 in, 2 out; AD/DA conversion: 16-bit, delta-sigma; Sampling rate: 32/44.1/48kHz; PC interface: USB2.0, female type B
Protection
MASTER A, B, AUX outputs: Adjustable peak limiters, -10 – +11dBu; Amplifier: Audio limiters, high temperature, DC, HF, short circuit, peak current limiters, turn-on delay, back EMF; Switching mode power supply (μC controlled): Inrush current limiters, ma
Safety Class
I
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 4Ω: 640W; into 8Ω: 350W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 4Ω: 500W; into 8Ω: 280W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 4Ω: 2 x 450W; into 8Ω: 2 x 270W;
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Total Harmonic Distortion
MIC input to master A L/R outputs, +10dBu, typical: < 0.015%; MIC input to speaker output: < 0.15%
Input Connections
5 x XLR/Jack socket
Input Sensitivity
MIC: -65dBu (435μV); LINE (mono): -45dBu (4.35mV); LINE (stereo): HI: -27dBu (34.6mV), LO: -11dBu (218mV); CD (stereo): -27dBu (34.6mV)
PowerMate 600-3
8‑channel compact power‑mixer
-
DIM 30
<0.05
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105
Power Requirement
100V to 240 VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
161.7
Width
438.8
Depth
362.5
Weight Net
9.5
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking: ±12dB / 2.4kHz; HI Shelving: ±15dB / 12 kHz; Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to 2.5
Filter
LO-CUT, mono inputs: f = 80Hz, 18dB/oct., switchable; Speaker Processing: LPN, switchable
Effects
Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Protection
Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/U
Safety Class
I
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Output Stage Topology, amplifier
Class D
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Input Connections
6
Maximum Output Voltage
74 Vrms
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Phantom Power
48VDC
Displays
128 x 64 pixels, OLED
Shipping Weight
12
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Maximum SPL
MIC inputs: +11dBu; Mono Line inputs: +31 dBu; Stereo Line inputs: +31dBu; All other inputs: +22dBu; All other outputs: +22dBu
Channels
4
Auxiliarys (MON, FX, AUX)
1 Pre, 1 Post, 1 Pre/Post switchable
CMRR, MIC input, 1 kHz
>80dB
Input Impedances
MIC: 2㏀; CD In: 10㏀; All other inputs: > 15㏀
Output Impedances
Phones: 47Ω; All other outputs (balanced/unbalanced): 150Ω / 75Ω
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down: -100dBu; Master fader 0dB, Channel fader down: -92dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu
PowerMate 1000-3
10‑channel compact power‑mixer
-
DIM 30
<0.05%
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105dB
Power Requirement
100V to 240VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
164.5
Width
510.5
Depth
571.5
Weight Net
14
Shipping Weight
17
Safety Class
I
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
Maximum SPL
MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Channels
6
Output Stage Topology, amplifier
Class D
Auxiliarys (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
CMRR, MIC input, 1 kHz
>80dB
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Input Impedances
MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Output Impedances
Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Filter
LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
Effects
Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Protection
Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Displays
128 x 64 pixels, OLED
Maximum Output Voltage
74 Vrms
Phantom Power
48VDC
PowerMate 1600-3
16‑channel compact power‑mixer
-
DIM 30
<0.05%
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105dB
Power Requirement
100V to 240VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
164.5
Width
663.5
Depth
571.5
Weight Net
17
Input Impedances
MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Output Impedances
Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down: -97dBu; Master fader 0dB, Channel fader down: -89dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Filter
LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Effects
Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Protection
Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
Safety Class
I
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Displays
128 x 64 pixels, OLED
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Maximum Output Voltage
74 Vrms
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Phantom Power
48VDC
Output Stage Topology, amplifier
Class D
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Shipping Weight
20
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Maximum SPL
MIC inputs: +21 dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu
Channels
12
Auxiliarys (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
CMRR, MIC input, 1 kHz
>80dB
PowerMate 2200-3
22‑channel compact power‑mixer
-
DIM 30
<0.05%
Crosstalk
Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB
Frequency Response (-3 dB)
Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz
Signal-to-Noise Ratio (A-weighted)
105dB
Power Requirement
100V to 240VAC, 50Hz to 60Hz
Power Consumption
450W
Cooling
Continuous speed controlled Fans
Height
155
Width
818.5
Depth
498.5
Weight Net
18
MIDI Interface
5-pin DIN connector, In / Out
Protection
Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
Displays
128 x 64 pixels, OLED
Safety Class
I
Maximum Output Voltage
74 Vrms
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Phantom Power
48VDC
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz
<0.15%
Shipping Weight
22
Output Stage Topology, amplifier
Class D
Operating Temperature Range
+5 °C…+40 °C (40 °F…105 °F)
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz
into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
Maximum SPL
MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu
Channels
18
Auxiliarys (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
CMRR, MIC input, 1 kHz
>80dB
Input Impedances
MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Output Impedances
Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down: -97dBu; Master fader 0dB, Channel fader down: -87dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -81dBu
Total Harmonic Distortion
MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
Equalization
LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Filter
LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
Effects
Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Input Sensitivity
MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Digital Audio Interface
Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
PM 502 |
PowerMate 600-3 |
PowerMate 1000-3 |
PowerMate 1600-3 |
PowerMate 2200-3 | |
DIM 30 | <0.05%% | <0.05% | <0.05%% | <0.05%% | <0.05%% |
Crosstalk | < Amplifier Ch1/Ch2: < -85dB; Channel to channel: < -78dBdB | < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB | < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB | < Amplifier L/R: < -85dB; Channel to Channel: < -80dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB | < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB |
Frequency Response (-3 dB) | Any input to any Mixer output: 15–22000Hz; Any input to Speaker output: 20–22000HzHz | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz | Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz |
Signal-to-Noise Ratio (A-weighted) | 104dB | 105dB | 105dBdB | 105dBdB | 105dBdB |
Power Requirement | 100V to 240 VAC, 50Hz to 60Hz | 100V to 240VAC, 50Hz to 60Hz | 100V to 240VAC, 50Hz to 60Hz | 100V to 240VAC, 50Hz to 60Hz | |
Power Consumption | 180W | 450W | 450W | 450W | 450W |
Cooling | Continuous speed controlled fan | Continuous speed controlled Fans | Continuous speed controlled Fans | Continuous speed controlled Fans | Continuous speed controlled Fans |
Height | 244mm (9.61") | 161.7mm (6.37") | 164.5mm (6.48") | 164.5mm (6.48") | 155mm (6.1") |
Width | 395mm (15.55") | 438.8mm (17.28") | 510.5mm (20.1") | 663.5mm (26.12") | 818.5mm (32.22") |
Depth | 241mm (9.49") | 362.5mm (14.27") | 571.5mm (22.5") | 571.5mm (22.5") | 498.5mm (19.63") |
Weight Net | 4.9kg (10.8 lbs) | 9.5kg (20.94 lbs) | 14kg (30.86 lbs) | 17kg (37.48 lbs) | 18kg (39.68 lbs) |
MIDI Interface | 5-pin DIN connector, In / Out | 5-pin DIN connector, In / Out | 5-pin DIN connector, In / Out | 5-pin DIN connector, In / Out | |
Displays | 128 x 64 pixels, LCD | 128 x 64 pixels, OLED | 128 x 64 pixels, OLED | 128 x 64 pixels, OLED | 128 x 64 pixels, OLED |
Equalization | Low shelving filter: ±15dB / 60Hz; Mid peak filter: ±12dB / 2.4kHz; High shelving filter: ±15dB / 12kHz | LO Shelving: ±15dB / 60Hz; MID Peaking: ±12dB / 2.4kHz; HI Shelving: ±15dB / 12 kHz; Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to 2.5 | LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to | LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to | LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to |
Input Impedances | MIC: 2㏀; CD: 10㏀; All other inputs: > 15㏀ | MIC: 2㏀; CD In: 10㏀; All other inputs: > 15㏀ | MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀ | MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀ | MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀ |
Output Impedances | PHONES: 47Ω; All other outputs (impedance balanced): 150Ω | Phones: 47Ω; All other outputs (balanced/unbalanced): 150Ω / 75Ω | Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced) | Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced) | Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced) |
Protection | MASTER A, B, AUX outputs: Adjustable peak limiters, -10 – +11dBu; Amplifier: Audio limiters, high temperature, DC, HF, short circuit, peak current limiters, turn-on delay, back EMF; Switching mode power supply (μC controlled): Inrush current limiters, ma | Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/U | Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/ | Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/ | Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/ |
Maximum Output Voltage | Dual channel mode: 52Vrms; Direct Drive mode: 100Vrms | 74 Vrms | 74 Vrms | 74 Vrms | 74 Vrms |
Shipping Weight | 6.4kg (14.11 lbs) | 12kg (26.46 lbs) | 17kg (37.48 lbs) | 20kg (44.09 lbs) | 22kg (48.5 lbs) |
Filter | Low-cut filter, microphone processing (switchable): 80Hz, 18dB/oct. or 150Hz, 12 dB/oct; Low-cut filter, amplifier (engaged in Direct Drive mode): 50Hz or 70Hz, 18dB/oct; Speaker processing: LPN, switchable | LO-CUT, mono inputs: f = 80Hz, 18dB/oct., switchable; Speaker Processing: LPN, switchable | LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable | LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable | LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable |
Equivalent Input Noise, MIC input, A-weighted, 150 ohms | -129dBu | -130dBu | -130dBu | -130dBu | -130dBu |
Safety Class | I | I | I | I | I |
Operating Temperature Range | 5° to 40°C (40° to 105°F) | +5 °C…+40 °C (40 °F…105 °F) | +5 °C…+40 °C (40 °F…105 °F) | +5 °C…+40 °C (40 °F…105 °F) | +5 °C…+40 °C (40 °F…105 °F) |
Effects | Type: Stereo 24/48-bit multi effects processor; Effect presets: 32 factory presets, user editable; Remote control: Footswitch | Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI | Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI | Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI | Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI |
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A | into 4Ω: 640W; into 8Ω: 350W | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W | into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W |
Phantom Power | 48VDC | 48VDC | 48VDC | 48VDC | 48VDC |
Digital Audio Interface | Channels: 2 in, 2 out; AD/DA conversion: 16-bit, delta-sigma; Sampling rate: 32/44.1/48kHz; PC interface: USB2.0, female type B | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip | Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip |
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% | into 4Ω: 500W; into 8Ω: 280W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W |
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | into 4Ω: 400W; into 8Ω: 240WW | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW | into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW |
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel | into 4Ω: 2 x 450W; into 8Ω: 2 x 270W; | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W | into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W |
Maximum SPL | MIC inputs: +11dBu; Mono Line inputs: +31 dBu; Stereo Line inputs: +31dBu; All other inputs: +22dBu; All other outputs: +22dBudB | MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB | MIC inputs: +21 dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB | MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB | |
Output Stage Topology, amplifier | Class D | Class D | Class D | Class D | Class D |
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz | <0.15% | <0.15% | <0.15% | <0.15% | <0.15% |
Channels | 5 | 4 | 6 | 12 | 18 |
Max. dual channel output power, dynamic headroom, IHF-A | into 4Ω: 2 x 600W; into 8Ω: 2 x 340W; | ||||
Auxiliarys (MON, FX, AUX) | 1 Post, 1 Pre | 1 Pre, 1 Post, 1 Pre/Post switchable | 2 Pre, 2 Post, 2 Pre/Post switchable | 2 Pre, 2 Post, 2 Pre/Post switchable | 2 Pre, 2 Post, 2 Pre/Post switchable |
CMRR, MIC input, 1 kHz | >80dB | >80dB | >80dB | >80dB | >80dB |
Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1% | into 12Ω: 680W | ||||
Output Power Control (Speaker Protection) | Adjustable longterm RMS Limiter | Adjustable longterm RMS Limiter | Adjustable longterm RMS Limiter | Adjustable longterm RMS Limiter | |
Transducer | dBu, typicalmm | ||||
Microphone mute switch attenuation | >100dB | ||||
Channel VOL and FX/AUX send attenuation | >85dB | ||||
Noise, Channel inputs to Master A L/R outputs, A-weighted | MASTER VOLUME down: -99dBu; MASTER VOLUME center, all channel volume down: -90dBu; MASTER VOLUME center, all channel volume center: -85dBu | Master fader down: -100dBu; Master fader 0dB, Channel fader down: -92dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu | Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu | Master fader down: -97dBu; Master fader 0dB, Channel fader down: -89dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu | Master fader down: -97dBu; Master fader 0dB, Channel fader down: -87dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -81dBu |
Max. level, mixing desk, input VOL down, output VOL up | MIC inputs, GAIN @ min. position: +11dBu; Mono line inputs, GAIN @ min. position: +30 dBu; Stereo line inputs: +26dBu; PHONES output: +21dBu; MASTER A, B, AUX outputs: +11dBu | ||||
Master EQ 7-band (63, 160, 400, 1k, 2.5k, 6k, 12k Hz) | ±10dB / Q =1.5 | ||||
Delay MASTER B, selectable | 0–145ms (0–50m) | ||||
Total Harmonic Distortion | MIC input to master A L/R outputs, +10dBu, typical: < 0.015%; MIC input to speaker output: < 0.15%% | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% | MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%% |
Input Connections | 5 x XLR/Jack socket | 6 | |||
Audio player (USB at front panel) | Switching mode power supply (μC controlled): FAT 32; Supported audio file formats: MP3, WAV; Interface: USB2.0, female type A; USB power supply, max. rated current (short circuit proof): 5 V, 500 mA; | ||||
AC power input | 100–240VAC, 50–60Hz | ||||
Input Sensitivity | MIC: -65dBu (435μV); LINE (mono): -45dBu (4.35mV); LINE (stereo): HI: -27dBu (34.6mV), LO: -11dBu (218mV); CD (stereo): -27dBu (34.6mV) | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) | MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V) |
Learn More | Learn More | Learn More | Learn More | Learn More |
Show more specs
Downloads
Warranty & After Sales Programs