Powered Mixers

DIM 30

<0.05

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105

Power Requirement

100V to 240 VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

161.7

Width

438.8

Depth

362.5

Weight Net

9.5

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Displays

128 x 64 pixels, OLED

Maximum Output Voltage

74 Vrms

Phantom Power

48VDC

Shipping Weight

12

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Maximum SPL

MIC inputs: +11dBu; Mono Line inputs: +31 dBu; Stereo Line inputs: +31dBu; All other inputs: +22dBu; All other outputs: +22dBu

Channels

4

Auxiliarys (MON, FX, AUX)

1 Pre, 1 Post, 1 Pre/Post switchable

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs (balanced/unbalanced): 150Ω / 75Ω

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -100dBu; Master fader 0dB, Channel fader down: -92dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking: ±12dB / 2.4kHz; HI Shelving: ±15dB / 12 kHz; Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to 2.5

Filter

LO-CUT, mono inputs: f = 80Hz, 18dB/oct., switchable; Speaker Processing: LPN, switchable

Effects

Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

MIDI Interface

5-pin DIN connector, In / Out

Protection

Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/U

Safety Class

I

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Input Connections

6

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Output Stage Topology, amplifier

Class D

DIM 30

<0.05%

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105dB

Power Requirement

100V to 240VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

164.5

Width

510.5

Depth

571.5

Weight Net

14

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Displays

128 x 64 pixels, OLED

Maximum Output Voltage

74 Vrms

Phantom Power

48VDC

Shipping Weight

17

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Maximum SPL

MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu

Channels

6

Auxiliarys (MON, FX, AUX)

2 Pre, 2 Post, 2 Pre/Post switchable

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Safety Class

I

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Filter

LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

Effects

Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

Output Stage Topology, amplifier

Class D

MIDI Interface

5-pin DIN connector, In / Out

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Protection

Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/

DIM 30

<0.05%

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105dB

Power Requirement

100V to 240VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

164.5

Width

663.5

Depth

571.5

Weight Net

17

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -97dBu; Master fader 0dB, Channel fader down: -89dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Filter

LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable

Effects

Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

MIDI Interface

5-pin DIN connector, In / Out

Displays

128 x 64 pixels, OLED

Maximum Output Voltage

74 Vrms

Protection

Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/

Safety Class

I

Phantom Power

48VDC

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Shipping Weight

20

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Output Stage Topology, amplifier

Class D

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Maximum SPL

MIC inputs: +21 dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu

Channels

12

Auxiliarys (MON, FX, AUX)

2 Pre, 2 Post, 2 Pre/Post switchable

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

DIM 30

<0.05%

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105dB

Power Requirement

100V to 240VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

155

Width

818.5

Depth

498.5

Weight Net

18

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Maximum SPL

MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Channels

18

Auxiliarys (MON, FX, AUX)

2 Pre, 2 Post, 2 Pre/Post switchable

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -97dBu; Master fader 0dB, Channel fader down: -87dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -81dBu

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to

Filter

LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable

Effects

Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

MIDI Interface

5-pin DIN connector, In / Out

Protection

Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/

Safety Class

I

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

Output Stage Topology, amplifier

Class D

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Displays

128 x 64 pixels, OLED

Maximum Output Voltage

74 Vrms

Phantom Power

48VDC

Shipping Weight

22