C1800FDi

DSP 2 x 950 W Leistungsverstärker für Festinstallationen

Summary & Images Specs Downloads & Support

DSP-Verstärker für die Festinstallation, Euroblock Anschlüsse
Integrierte Lautsprecher-Signalverarbeitung mit FIR-Drive Technologie
Marktführende Audioperformance, solide Bauweise und höchste Zuverlässigkeit.
Low Z und 70V Betrieb und Energiespar-Standby-Modus
Intuitive, einfache Konfiguration und Bedienung mit SONICUE Sound System Software (mit Firmware 2.0)

Technische Daten

Maximum Output Power, Single Channel	2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W
Maximum Output Power, Dual Channel	Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 2500W (-1.5 dB);
Maximum Output Power, Bridged	Load Impedance= 4Ω=2800W; 8Ω=1700W; 100V Operation=1x 1250W
Technische Daten

Maximum RMS Voltage Swing, THD = 1%, 1kHz	65.1V
Voltage Gain ref.1kHz	32.0dB
IMD-SMPTE, 60 Hz, 7 kHz	<0.1%
DIM 30	<0.05%
Maximum Input Level	+21dBu
Crosstalk	< -80dB
Frequency Response	10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced	20kΩ
Signal-to-Noise Ratio (A-weighted)	>105dB
Output Noise , A-weighted	<-68dBu
Output Stage Topology	Class AB
Power Requirement	240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption	700W
Protection	Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling	Front-to-rear, 3-stage-fans
Safety Class	I
Available Color	Black
Height	88mm (3.46")
Width	483mm (19.02")
Depth	462.4mm (18.2")
Weight Net	15.2kg (33.51 lbs)
Signal Processing	FIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array PEQ** per channel, load impedance
High Impedance Operation	70 V (dual channel), 100 V (bridged)
Remote Power ON/GPIO	Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Operating Temperature Range	+5°C to +40°C (40°F to +105°F)
Direct Drive Load Capability	Dual Channel 70V Operation: 2 x 1250 W (-1.5 dB) Dual Channel 100V Operation: Not available Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 2 x 1250 W (-1.5 dB)
Remote control	SONICUE sound system software (requires firmware 2.0)
Total Harmonic Distortion	<0.05%

Videos

Small Bar Sound System Solutions

C Series & L-Series Amplifiers

Downloads

Let's talk

Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include: