DPM UI-1

2ch universal input module

  • 109 dB dynamic range – for the best audio performance without disruptive incidental noise
  • Symmetrical inputs – high CMRR for avoiding incidental noise from crosstalk over long cables
  • Power supply for call stations – monitored with selfresetting fuse
  • Automatic configuration – mounting changes/deviations are detected and displayed in IRIS-Net
  • Input transformer – transformers (Lundahl LL1531) can be retrofitted as an option

The DPM UI-1 is a 2-channel universal input module for the DPM 8016 PROMATRIX CONTROLLER. The audio signals are connected via screw-in Euroblock connectors. Channel A is a universal MIC/LINE input with programmable input sensitivity and switchable phantom power supply. The second channel can be used either as a LINE input (B) or as a call station input (C). Up to four DPC call stations can be connected to the PCA BUS interface.

Linear, high-precision 24-bit converters are used for the A/D conversion. The internal signal preparation uses a 48-bit name length.

Specifications

Supply voltage/current +3.3 V DC, ± 0.3 V / 6 mA
+5 V DC, ± 0.3 V / 18 mA
+18 V DC, ± 0.5 V / 66 mA
-18 V DC, ± 0.5 V / 12 mA
+24 V DC/max. 1 A, depends onnumber of connected DPCs+48 V DC, ± 0.5 V / 11 mA
Audio inputs 2 x 3-pin Euroblock connectors, electronically symmetrical
• Input level (nominal) +6 dBu/1.55 V
• Input level (max. beforeclip) Input A (MIC / LINE): +18 dBu/6.15 V
Input B (LINE): +18 dBu/6.15 V
Input C (PCA BUS): +12 dBu/3.1V
• Input impedance Input A (MIC / LINE): 2.5 kΩ
Input B (LINE): 20 kΩ
Input C (PCA BUS): 20 kΩ
• Common mode rejection > 80 dB (f = 1 kHz)
• Phantom power +48 V/10 mA, switchable for input A
• A/D conversion 24 bit, sigma-delta, 128 times oversampling

PCA input Integrated power – CAN – audio interface, RJ-45                                                                                      
• Power +24 V DC, electronic fuse
• CAN 10, 20, or 62.5 kbit/s
• Audio electronically symmetrical
• Max. length 1000 m
Frequency response 20–20,000 Hz (-0.5 dB)
Signal-to-noise ratio (A-weighted) 109 dB typical
THD+N < 0.003%
Crosstalk < -100 dB
SMPTE (DIN 4:1) < 0.005% (at Ue = +6 dBu)
Sample rate 48 kHz
Data format 24-bit linear A/D conversion, 48-bit processing
Operating temperature -5 °C to +45 °C
Product dimensions (Width by Height by Depth) 81.8 x 27.3 x 189.3 mm
Net weight 100 g
Optional accessories
• Input transformer Type LL1531, LundahlTransformers, Sweden

Downloads

Technical Documentations
Name Language & Download
DPM UI-1 Engineering Data Sheet en
Name Language & Download
EN 54-Certified Solutions Installer Checklist en
PMX-CSK Manual de en
ProMatrix Service Handbook de
Name Language & Download
PROMATRIX 8000 Network Configuration Guide en
PROMATRIX 8000 Netzwerk-Konfigurationsanleitung de
Name Language & Download
Service Policies for Asia/Pacific Rim en
Service Policies for China en
Warranty conditions for Dynacord products in Europe, the Middle East, & Africa en de
Warranty conditions for Dynacord products in North America en
Software, Firmware & Design Tools
Name Language & Download
LT-802GBTME V2.4.12 Firmware Download
LT-802GBTME V2.8.1 Firmware Download
Name Language & Download
IRIS-Net Configuration Manual DE Download
IRIS-Net Configuration Manual EN Download
IRIS-Net ReadMe Download
IRIS-Net V4.1.0 Download
Marketing Materials
Name Language & Download
Dynacord Elektronik Katalog Download
Retail catalog EMEA Download Download