PM 502
8-Kanal kompakter Powermischer
- 5 MIC/LINE-Kanäle (Low Noise/High Gain)
- 3 Stereokanäle (Klinke, RCA, USB)
- Zuschaltbare 48-V-Phantomspeisung
- Integrierter MP3-Media-Player (USB-Typ A auf der Vorderseite)
- Integrierter HQ-48-Bit-Effektprozessor mit 32 editierbaren Presets (PowerMate Algorithmen)
- Alle Masterausgänge mit eigenem grafischem 7-Band-EQ
- Integrierter 2 x 450 W RMS/2 x 600 W Programm (4 Ohm) Class-D-Leistungsverstärker, schaltbar auf 100-V-Betrieb (mono)
- LPN Processing für Lautsprecher mit kleinem bis mittlerem Volumen für druckvolleren Punch und verbesserte Transparenz im gesamten Tief-/Mittelton-Bereich
Der PM 502 kombiniert ausgefeilte analoge Eingangsschaltungen und eine ansprechende Bedienoberfläche mit den Vorteilen seines digitalen Master- und Verstärkerbereichs. Das Ergebnis ist eine neue Dimension von Flexibilität in dieser Klasse. Die Audioperformance erfüllt alle Erwartungen an ein Qualitätsprodukt von Dynacord. Der PM 502 ist durch die Eingangsstruktur, das gesamte Funktionspaket und die Anschlussmöglichkeiten das Herzstück zahlreicher Installationen – von Bistros, kleinen Clubs, Boutiquen und Hotelbars bis hin zu Kirchen, Moscheen und ähnlichen Anwendungen. Der PM 502 ist außerdem eine äußerst vielseitige Lösung für viele Live-Anwendungen.
Specifications
| DIM 30 | <0.05% |
| Crosstalk | Amplifier Ch1/Ch2: < -85dB; Channel to channel: < -78dB |
| Frequency Response (-3 dB) | Any input to any Mixer output: 15–22000Hz; Any input to Speaker output: 20–22000Hz |
| Signal-to-Noise Ratio (A-weighted) | 104 |
| Power Consumption | 180W |
| Cooling | Continuous speed controlled fan |
Specifications | |
| Height | 244 |
| Width | 395 |
| Depth | 241 |
| Weight Net | 4.9 |
| Master EQ 7-band (63, 160, 400, 1k, 2.5k, 6k, 12k Hz) | ±10dB / Q =1.5 |
| Maximum Output Voltage | Dual channel mode: 52Vrms; Direct Drive mode: 100Vrms |
| Delay MASTER B, selectable | 0–145ms (0–50m) |
| Audio player (USB at front panel) | Switching mode power supply (μC controlled): FAT 32; Supported audio file formats: MP3, WAV; Interface: USB2.0, female type A; USB power supply, max. rated current (short circuit proof): 5 V, 500 mA; |
| Phantom Power | 48VDC |
| AC power input | 100–240VAC, 50–60Hz |
| Shipping Weight | 6.4 |
| Operating Temperature Range | 5° to 40°C (40° to 105°F) |
| Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | into 4Ω: 400W; into 8Ω: 240W |
| Transducer | dBu, typical |
| Channels | 5 |
| Auxiliarys (MON, FX, AUX) | 1 Post, 1 Pre |
| CMRR, MIC input, 1 kHz | >80dB |
| Input Impedances | MIC: 2㏀; CD: 10㏀; All other inputs: > 15㏀ |
| Output Impedances | PHONES: 47Ω; All other outputs (impedance balanced): 150Ω |
| Equivalent Input Noise, MIC input, A-weighted, 150 ohms | -129dBu |
| Noise, Channel inputs to Master A L/R outputs, A-weighted | MASTER VOLUME down: -99dBu; MASTER VOLUME center, all channel volume down: -90dBu; MASTER VOLUME center, all channel volume center: -85dBu |
| Equalization | Low shelving filter: ±15dB / 60Hz; Mid peak filter: ±12dB / 2.4kHz; High shelving filter: ±15dB / 12kHz |
| Filter | Low-cut filter, microphone processing (switchable): 80Hz, 18dB/oct. or 150Hz, 12 dB/oct; Low-cut filter, amplifier (engaged in Direct Drive mode): 50Hz or 70Hz, 18dB/oct; Speaker processing: LPN, switchable |
| Effects | Type: Stereo 24/48-bit multi effects processor; Effect presets: 32 factory presets, user editable; Remote control: Footswitch |
| Digital Audio Interface | Channels: 2 in, 2 out; AD/DA conversion: 16-bit, delta-sigma; Sampling rate: 32/44.1/48kHz; PC interface: USB2.0, female type B |
| Protection | MASTER A, B, AUX outputs: Adjustable peak limiters, -10 – +11dBu; Amplifier: Audio limiters, high temperature, DC, HF, short circuit, peak current limiters, turn-on delay, back EMF; Switching mode power supply (μC controlled): Inrush current limiters, ma |
| Safety Class | I |
| Max. Single Channel Output Power, Dynamic-Headroom, IHF-A | into 4Ω: 640W; into 8Ω: 350W |
| Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% | into 4Ω: 500W; into 8Ω: 280W |
| Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel | into 4Ω: 2 x 450W; into 8Ω: 2 x 270W; |
| IMD-SMPTE, power amplifier, 60 Hz, 7 kHz | <0.15% |
| Total Harmonic Distortion | MIC input to master A L/R outputs, +10dBu, typical: < 0.015%; MIC input to speaker output: < 0.15% |
| Output Stage Topology, amplifier | Class D |
| Input Connections | 5 x XLR/Jack socket |
| Max. dual channel output power, dynamic headroom, IHF-A | into 4Ω: 2 x 600W; into 8Ω: 2 x 340W; |
| Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1% | into 12Ω: 680W |
| Microphone mute switch attenuation | >100dB |
| Input Sensitivity | MIC: -65dBu (435μV); LINE (mono): -45dBu (4.35mV); LINE (stereo): HI: -27dBu (34.6mV), LO: -11dBu (218mV); CD (stereo): -27dBu (34.6mV) |
| Channel VOL and FX/AUX send attenuation | >85dB |
| Max. level, mixing desk, input VOL down, output VOL up | MIC inputs, GAIN @ min. position: +11dBu; Mono line inputs, GAIN @ min. position: +30 dBu; Stereo line inputs: +26dBu; PHONES output: +21dBu; MASTER A, B, AUX outputs: +11dBu |
| Displays | 128 x 64 pixels, LCD |
Downloads
Technical Documentations
Certification
Technische Daten
| Name | Language & Download |
|---|---|
| PM502 Engineering Data Sheet | en |
Marketing Materials
Broschüre
| Name | Language & Download |
|---|---|
| Dynacord Amplifiers, Digital Audio Matrices, Software & Mixers Catalog | Download Download |
| Dynacord Amplifiers, Digital Audio Matrices, Software & Mixers Catalog EMEA | Download |
| Dynacord amplifiers, digital audio matrixes, software & mixers catalog 2019 PL | Download |
| Dynacord Elektronik Katalog | Download |
| PM502 Brochure | Download |
| PM502 Katalog | Download |
| Retail catalog EMEA | Download Download |
Produktbild