DSA 8405

4 x 500 w multichannel power amplifier for fixed install applications

Summary & Images Specs Downloads & Support
  • 4 x 500 W into LZ and HZ (70 V / 100 V)
  • Variable Load Drive (VLD)
  • Optimized for 24/7
  • High efficient Class D design
  • Remote Control with optional Control Module (RCM-810)

Innovative Dynacord technology, exemplary flexibility, very high output with an extremely good efficiency and integration into IRIS‑Net networks.

Each channel can be switched individually to provide 500 W at either 2 Ohms, 4 Ohms or to drive 70 Vrms or 100 Vrms loudspeaker lines directly without an output transformer. In combination with the RCM‑810 module the user can configure these amplifiers under IRIS‑Net using the Variable Load Drive (VLD) to provide any output power in the range of 100 W to 500 W per channel (1 W increments) at any load in the range of 2 Ohms ‑ 10 Ohms (0,1 Ohms increments).

The audio quality fullfills all requirements of demanding ProSound applications.

The Phoenix input connectors are electronically balanced. Phoenix connectors are also provided for the power outputs.

The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote‑supervision and –control possibilities and integration into IRIS‑Net networks, an optional remote control module (RCM‑810) is available.

Specifications

Low impedance mode High impedance mode
2 Ω 4 Ω 8 Ω 70 V/10 Ω 100 V/20 Ω
Maximum midband output power, THD = 1%, 1 kHz, 4 channels driven 500 W 500 W 250 W VLD: 500 W 500 W 500 W
Rated output power, THD < 0.3%, 20-20 000 Hz, 4 channels driven 450 W 450 W 225 W VLD: 450 W 450 W 450 W
Maximum bridged output power, THD = 1%, 1 kHz - 1000 W 1000 W 1000 W/20 Ω 1000 W/40 Ω
Alarm power rating (according to EN 54-16) - 325 W 250 W VLD: 325 W 325 W 325 W
Maximum RMS voltage swing, THD = 1%, 1 kHz 32 V 45 V 45 V VLD: 63 V 70 V 100 V
Power Bandwidth, THD = 1%, ref. 1 kHz, half power at rated load 10-25000 Hz 50-25000 Hz
Voltage gain, ref. 1 kHz 32 dB 32 dB 32 dB 33 dB 36 dB
Input Sensitivity, rated power, 1 kHz 0.775 V (0.0 dBu) 1.1 V (+3.0 dBu) 1.1 V (+3.0 dBu) 1.55 V (+6.0 dBu) 1.55 V (+6.0 dBu)

THD at rated output power, MBW = 80 kHz, 1 kHz < 0.05%
IMD-SMPTE, 60 Hz, 7 kHz < 0.05%
DIM30, 3.15 kHz, 15 kHz < 0.02%
Maximum input level +22 dBu (9.76 Vrms)
Crosstalk, ref. 1 kHz, at rated output power < -80 dB
Frequency response, ref. 1 kHz, 8 Ω load 15-30000 Hz (±1 dB)
Input impedance, active balanced 20 kΩ
Damping factor, 1 kHz, 8 Ω > 240
Slew rate 28 V/μs
Signal-to-noise ratio (A-weighted) 98 dB 100 dB 100 dB 104 dB 106 dB
Output noise, A-weighted < -66 dBu < -65 dBu < -65 dBu < -65 dBu < -64 dBu
Output stage topology Class D
Power requirements 220-240 V, 50-60 Hz or 120 V, 50-60 Hz or 100 V, 50-60 Hz
In-rush current 27 A
In-rush current, after five-second power cycle 14 A
Power consumption, 1/8 maximum output power 490 W
Protection Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/Undervoltage Protection
Cooling Front-to-Rear, temperature controlled fans
Electromagnetical environment E1, E2, E3
Operating temperature +5° to +40° C
Safety class I
Product dimensions (Width x Height x Depth) 483 x 88.1 x 420.8 mm
Net weight 11.1 kg
* Depending on the ambient temperature, the unit might not operate continuously at 2 Ω load in Dual Mode or 4 Ω load in Bridged Mode. In addition input power exceeds 1.1 times rated power consumption with at 2 Ω load in Dual Mode or 4 Ω load in Bridged Mode.

Downloads

Technical Documentations
Name Language & Download
DSA8405 A&E Specification EN
Name Language & Download
DSA_8xxx EU Declaration of Conformity EN
DSA8xxx Declaration of Conformity EN
Name Language & Download
DSA 8405 Engineering Data Sheet EN DE
Name Language & Download
DSA Series Multichannel Amplifier Owners Manual (EN & DE) EN
Name Language & Download
Service Policies for Asia/Pacific Rim EN
Service Policies for China EN
Warranty conditions for Dynacord products in Europe, the Middle East, & Africa EN DE
Warranty conditions for Dynacord products in North America EN
Software, Firmware & Design Tools
Name Language & Download
IRIS-Net ReadMe Download
IRIS-Net V4.1.0 Download
Name Language & Download
SONICUE 1.4 Download
SONICUE 1.3.1 Download
How to upgrade Dynacord L- and C Series amplifiers firmware to SONICUE Download
Loudspeaker Settings for SONICUE Download
Marketing Materials
Name Language & Download
Dynacord Amplifiers, Digital Audio Matrices, Software & Mixers Catalog EMEA Download
Dynacord amplifiers, digital audio matrixes, software & mixers catalog 2019 PL Download
Dynacord amplifiers, digital audio matrixes, software & mixers catalog 2019 RO Download
Dynacord Elektronik Katalog Download
Retail catalog EMEA Download Download

Let's talk

Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

  • System Design
  • Installation
  • Programming & Commissioning

Find your local contact

Warranty & After Sales Programs

Compatible Products

IRIS‑Net

Integrated software platform for remote controllable devices & systems

sprites_global sprites_ev