C1800FDi
DSP 2 x 950 W Leistungsverstärker für Festinstallationen
- DSP-Verstärker für die Festinstallation, Euroblock Anschlüsse
- Integrierte Lautsprecher-Signalverarbeitung mit FIR-Drive Technologie
- Marktführende Audioperformance, solide Bauweise und höchste Zuverlässigkeit.
- Low Z und 70V Betrieb und Energiespar-Standby-Modus
- Intuitive, einfache Konfiguration und Bedienung mit SONICUE Sound System Software (mit Firmware 2.0)
Technische Daten
| Maximum Output Power, Single Channel | 2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W |
| Maximum Output Power, Dual Channel | Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 2500W (-1.5 dB); |
| Maximum Output Power, Bridged | Load Impedance= 4Ω=2800W; 8Ω=1700W; 100V Operation=1x 1250W |
Technische Daten |
|
| Maximum RMS Voltage Swing, THD = 1%, 1kHz | 65.1V |
| Voltage Gain ref.1kHz | 32.0dB |
| IMD-SMPTE, 60 Hz, 7 kHz | <0.1% |
| DIM 30 | <0.05% |
| Maximum Input Level | +21dBu |
| Crosstalk | < -80dB |
| Frequency Response | 10 Hz to 21 kHz (±1 dB) |
| Input Impedance, active balanced | 20kΩ |
| Signal-to-Noise Ratio (A-weighted) | >105dB |
| Output Noise , A-weighted | <-68dBu |
| Output Stage Topology | Class AB |
| Power Requirement | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) |
| Power Consumption | 700W |
| Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay |
| Cooling | Front-to-rear, 3-stage-fans |
| Safety Class | I |
| Available Color | Black |
| Height | 3.46" (88mm) |
| Width | 19.02" (483mm) |
| Depth | 18.2" (462.4mm) |
| Weight Net | 33.51lbs (15.2kg) |
| Signal Processing | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance |
| Remote control | SONICUE sound system software (requires firmware 2.0) |
| Total Harmonic Distortion | <0.05% |
| High Impedance Operation | 70 V (dual channel), 100 V (bridged) |
| Remote Power ON/GPIO | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection |
| Operating Temperature Range | +5°C to +40°C (40°F to +105°F) |
| Direct Drive Load Capability | Dual Channel 70V Operation: 2 x 1250 W (-1.5 dB) Dual Channel 100V Operation: Not available Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 2 x 1250 W (-1.5 dB) |
Videos
Small Bar Sound System Solutions
C Series & L-Series Amplifiers
Downloads
Technical Documentations
A/E Specification
| Name | Language & Download |
|---|---|
| C Series All models A&E Specification | EN |
Certification
| Name | Language & Download |
|---|---|
| L C Series EU Declaration of Conformity | EN |
Engineering Data Sheet
Manual
Other Documentation
Service Policies
White Paper
| Name | Language & Download |
|---|---|
| Dynacord C series amplifiers for direct drive | EN |
Software, Firmware & Design Tools
Drawing
| Name | Language & Download |
|---|---|
| C Series CAD Drawing | Download |
Firmware
Let's talk
Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Garantie & Kundendienst-Programme
Compatible Products
