C2800FDi

DSP 2 x 1400 W Leistungsverstärker für Festinstallationen

Summary & Images Specs Downloads & Support

DSP-Verstärker für die Festinstallation, Euroblock Anschlüsse
Integrierte Lautsprecher-Signalverarbeitung mit FIR-Drive Technologie
Marktführende Audioperformance, solide Bauweise und höchste Zuverlässigkeit.
Low Z und 70V Betrieb und Energiespar-Standby-Modus
Intuitive, einfache Konfiguration und Bedienung mit SONICUE Sound System Software (mit Firmware 2.0)

Technische Daten

Maximum Output Power, Single Channel	2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W;
Maximum Output Power, Dual Channel	Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W (-3.0 dB)
Maximum Output Power, Bridged	Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended
Technische Daten

Maximum RMS Voltage Swing, THD = 1%, 1kHz	78.8V
Voltage Gain ref.1kHz	32.0dB
IMD-SMPTE, 60 Hz, 7 kHz	<0.1%
DIM 30	<0.05%%
Maximum Input Level	+21dBu
Crosstalk	< -80dB
Frequency Response	10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced	20kΩ
Signal-to-Noise Ratio (A-weighted)	>107dB
Output Noise , A-weighted	<-68dBu
Output Stage Topology	Class H
Power Requirement	240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption	700W
Protection	Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling	Front-to-rear, 3-stage-fans
Safety Class	I
Available Color	Black
Height	3.46" (88mm)
Width	19.02" (483mm)
Depth	18.2" (462.4mm)
Weight Net	35.71lbs (16.2kg)
Signal Processing	FIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array PEQ** per channel, load impedance
Remote control	SONICUE sound system software (requires firmware 2.0)
Total Harmonic Distortion	< 0.05%
High Impedance Operation	70 V, 100 V (dual channel & bridged)
Remote Power ON/GPIO	Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Operating Temperature Range	+5°C to +40°C (40°F to +105°F)
Direct Drive Load Capability	Dual Channel 70V Operation: 2 x 1250 W (0.0 dB) Dual Channel 100V Operation: 2 x 2500 W (-3.0 dB) Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 1 x 1250 W (0.0 dB)

Videos

Small Bar Sound System Solutions

C Series & L-Series Amplifiers

Downloads

Let's talk

Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include: