Powered Mixers

DIM 30

<0.05%

Crosstalk

Amplifier Ch1/Ch2: < -85dB; Channel to channel: < -78dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15–22000Hz; Any input to Speaker output: 20–22000Hz

Signal-to-Noise Ratio (A-weighted)

104

Power Consumption

180W

Cooling

Continuous speed controlled fan

Height

244

Width

395

Depth

241

Weight Net

4.9

Noise, Channel inputs to Master A L/R outputs, A-weighted

MASTER VOLUME down: -99dBu; MASTER VOLUME center, all channel volume down: -90dBu; MASTER VOLUME center, all channel volume center: -85dBu

Equalization

Low shelving filter: ±15dB / 60Hz; Mid peak filter: ±12dB / 2.4kHz; High shelving filter: ±15dB / 12kHz

Filter

Low-cut filter, microphone processing (switchable): 80Hz, 18dB/oct. or 150Hz, 12 dB/oct; Low-cut filter, amplifier (engaged in Direct Drive mode): 50Hz or 70Hz, 18dB/oct; Speaker processing: LPN, switchable

Effects

Type: Stereo 24/48-bit multi effects processor; Effect presets: 32 factory presets, user editable; Remote control: Footswitch

Digital Audio Interface

Channels: 2 in, 2 out; AD/DA conversion: 16-bit, delta-sigma; Sampling rate: 32/44.1/48kHz; PC interface: USB2.0, female type B

Protection

MASTER A, B, AUX outputs: Adjustable peak limiters, -10 – +11dBu; Amplifier: Audio limiters, high temperature, DC, HF, short circuit, peak current limiters, turn-on delay, back EMF; Switching mode power supply (μC controlled): Inrush current limiters, ma

Safety Class

I

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 4Ω: 640W; into 8Ω: 350W

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 4Ω: 500W; into 8Ω: 280W

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 4Ω: 2 x 450W; into 8Ω: 2 x 270W;

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Total Harmonic Distortion

MIC input to master A L/R outputs, +10dBu, typical: < 0.015%; MIC input to speaker output: < 0.15%

Input Connections

5 x XLR/Jack socket

Output Stage Topology, amplifier

Class D

Max. dual channel output power, dynamic headroom, IHF-A

into 4Ω: 2 x 600W; into 8Ω: 2 x 340W;

Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1%

into 12Ω: 680W

Input Sensitivity

MIC: -65dBu (435μV); LINE (mono): -45dBu (4.35mV); LINE (stereo): HI: -27dBu (34.6mV), LO: -11dBu (218mV); CD (stereo): -27dBu (34.6mV)

Microphone mute switch attenuation

>100dB

Channel VOL and FX/AUX send attenuation

>85dB

Displays

128 x 64 pixels, LCD

Max. level, mixing desk, input VOL down, output VOL up

MIC inputs, GAIN @ min. position: +11dBu; Mono line inputs, GAIN @ min. position: +30 dBu; Stereo line inputs: +26dBu; PHONES output: +21dBu; MASTER A, B, AUX outputs: +11dBu

Maximum Output Voltage

Dual channel mode: 52Vrms; Direct Drive mode: 100Vrms

Master EQ 7-band (63, 160, 400, 1k, 2.5k, 6k, 12k Hz)

±10dB / Q =1.5

Delay MASTER B, selectable

0–145ms (0–50m)

Phantom Power

48VDC

Audio player (USB at front panel)

Switching mode power supply (μC controlled): FAT 32; Supported audio file formats: MP3, WAV; Interface: USB2.0, female type A; USB power supply, max. rated current (short circuit proof): 5 V, 500 mA;

AC power input

100–240VAC, 50–60Hz

Shipping Weight

6.4

Operating Temperature Range

5° to 40°C (40° to 105°F)

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 400W; into 8Ω: 240W

Transducer

dBu, typical

Channels

5

Auxiliarys (MON, FX, AUX)

1 Post, 1 Pre

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; CD: 10㏀; All other inputs: > 15㏀

Output Impedances

PHONES: 47Ω; All other outputs (impedance balanced): 150Ω

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-129dBu

DIM 30

<0.05

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105

Power Requirement

100V to 240 VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

161.7

Width

438.8

Depth

362.5

Weight Net

9.5

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Input Connections

6

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Output Stage Topology, amplifier

Class D

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Displays

128 x 64 pixels, OLED

Maximum Output Voltage

74 Vrms

Phantom Power

48VDC

Shipping Weight

12

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Maximum SPL

MIC inputs: +11dBu; Mono Line inputs: +31 dBu; Stereo Line inputs: +31dBu; All other inputs: +22dBu; All other outputs: +22dBu

Channels

4

Auxiliarys (MON, FX, AUX)

1 Pre, 1 Post, 1 Pre/Post switchable

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs (balanced/unbalanced): 150Ω / 75Ω

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -100dBu; Master fader 0dB, Channel fader down: -92dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking: ±12dB / 2.4kHz; HI Shelving: ±15dB / 12 kHz; Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to 2.5

Filter

LO-CUT, mono inputs: f = 80Hz, 18dB/oct., switchable; Speaker Processing: LPN, switchable

Effects

Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

MIDI Interface

5-pin DIN connector, In / Out

Protection

Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/U

Safety Class

I

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

DIM 30

<0.05%

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105dB

Power Requirement

100V to 240VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

164.5

Width

510.5

Depth

571.5

Weight Net

14

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Displays

128 x 64 pixels, OLED

Maximum Output Voltage

74 Vrms

Phantom Power

48VDC

Shipping Weight

17

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Maximum SPL

MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu

Channels

6

Auxiliarys (MON, FX, AUX)

2 Pre, 2 Post, 2 Pre/Post switchable

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Safety Class

I

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Filter

LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

Effects

Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

Output Stage Topology, amplifier

Class D

MIDI Interface

5-pin DIN connector, In / Out

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Protection

Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

DIM 30

<0.05%

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105dB

Power Requirement

100V to 240VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

164.5

Width

663.5

Depth

571.5

Weight Net

17

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -97dBu; Master fader 0dB, Channel fader down: -89dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -82dBu

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to

Displays

128 x 64 pixels, OLED

Filter

LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable

Maximum Output Voltage

74 Vrms

Effects

Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

Phantom Power

48VDC

MIDI Interface

5-pin DIN connector, In / Out

Protection

Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/

Shipping Weight

20

Safety Class

I

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

Maximum SPL

MIC inputs: +21 dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Channels

12

Output Stage Topology, amplifier

Class D

Auxiliarys (MON, FX, AUX)

2 Pre, 2 Post, 2 Pre/Post switchable

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

DIM 30

<0.05%

Crosstalk

Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dB

Frequency Response (-3 dB)

Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHz

Signal-to-Noise Ratio (A-weighted)

105dB

Power Requirement

100V to 240VAC, 50Hz to 60Hz

Power Consumption

450W

Cooling

Continuous speed controlled Fans

Height

155

Width

818.5

Depth

498.5

Weight Net

18

Shipping Weight

22

Operating Temperature Range

+5 °C…+40 °C (40 °F…105 °F)

Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz

into 4Ω: 2 x 900W; into 8Ω: 2 x 450W

Maximum SPL

MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBu

Channels

18

Auxiliarys (MON, FX, AUX)

2 Pre, 2 Post, 2 Pre/Post switchable

CMRR, MIC input, 1 kHz

>80dB

Input Impedances

MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀

Output Impedances

Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130dBu

Noise, Channel inputs to Master A L/R outputs, A-weighted

Master fader down: -97dBu; Master fader 0dB, Channel fader down: -87dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -81dBu

Equalization

LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to

Filter

LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable

Effects

Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI

Digital Audio Interface

Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip

MIDI Interface

5-pin DIN connector, In / Out

Protection

Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/

Safety Class

I

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W

Total Harmonic Distortion

MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

<0.15%

Output Stage Topology, amplifier

Class D

Input Sensitivity

MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Displays

128 x 64 pixels, OLED

Maximum Output Voltage

74 Vrms

Phantom Power

48VDC