DSA 8410
4x 1000 w multichannel power amplifier for fixed install applications
- 4 x 1000 W into LZ and HZ (70 V / 100 V)
- Variable Load Drive (VLD)
- Optimized for 24/7
- High efficient Class D design
- Remote Control with optional Control Module (RCM-810)
Innovative Dynacord technology, exemplary flexibility, very high output with an extremely good efficiency and integration into IRIS‑Net networks.
Each channel can be switched individually to provide 1000 W at either 2 Ohms, 4 Ohms or to drive 70 Vrms or 100 Vrms loudspeaker lines directly without an output transformer. In combination with the RCM‑810 module the user can configure these amplifiers under IRIS‑Net using the Variable Load Drive (VLD) to provide any output power in the range of 100 W to 1000 W per channel (1 W increments) at any load in the range of 2 Ohms ‑ 10 Ohms (0,1 Ohms increments).
The audio quality fullfills all requirements of demanding ProSound applications.
The Phoenix input connectors are electronically balanced. Phoenix connectors are also provided for the power outputs.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote‑supervision and –control possibilities and integration into IRIS‑Net networks, an optional remote control module (RCM‑810) is available.
Specifications
| Low impedance mode | High impedance mode | ||||
| 2 Ω | 4 Ω | 8 Ω | 70 V/10 Ω | 100 V/20 Ω | |
| Maximum midband output power,THD = 1%, 1 kHz, 4 channels driven | 1000 W | 1000 W | 500 W VLD: 1000 W | 500 W | 500 W |
| Rated output power, THD < 0.3%,20–20 000 Hz, 4 channels driven | 900 W | 900 W | 450 WVLD: 900 W | 900 W | 900 W |
| Maximum bridged output power,THD = 1%, 1 kHz | - | 2000 W | 2000 W | 2000 W/10 Ω | 2000 W/20 Ω |
| Alarm power rating (according toEN 54-16) | - | 350 W | 350 W | 350 W | 350 W |
| Maximum RMS voltage swing, THD= 1%, 1 kHz | 45 V | 63 V | 63 VVLD: 89 V | 70 V | 100 V |
| Power Bandwidth, THD = 1%, ref.1 kHz, half power at rated load | 10–25000 Hz | 50–25000 Hz | |||
| Voltage gain, ref. 1 kHz | 32 dB | 32 dB | 32 dB | 33 dB | 36 dB |
| Input Sensitivity, rated power, 1kHz | 1.1 V (+3.0 dBu) | 1.55 V (+6.0 dBu) | 1.55 V (+6.0dBu) | 1.55 V (+6.0 dBu) | 1.55 V (+6.0 dBu) |
Specifications |
|||||
| THD at rated output power, MBW=80 kHz, 1 kHz | < 0.05% | ||||
| IMD-SMPTE, 60 Hz, 7 kHz | < 0.05% | ||||
| DIM30, 3.15 kHz, 15 kHz | < 0.02% | ||||
| Maximum input level | +22 dBu (9.76 Vrms) | ||||
| Crosstalk, ref. 1 kHz, at rated output power | < -80 dB | ||||
| Frequency response, ref. 1 kHz, 8Ω load | 15–30000 Hz (±1 dB) | ||||
| Input impedance, active balanced | 20 kΩ | ||||
| Damping factor, 1 kHz, 8 Ω | > 240 | ||||
| Slew rate | 28 V/μs | ||||
| Signal-to-noise ratio (A-weighted) | 101 dB | 103 dB | 103 dB | 104 dB | 106 Db |
| Output noise, A-weighted | < -66 dBu | < -65 dBu | < -65 dBu | < -65 dBu | < -64 dBu |
| Output stage topology | Class D | ||||
| Power requirements | 220-240 V, 50-60 Hz or 120 V, 50-60 Hz or 100 V, 50-60 Hz | ||||
| In-rush current | 27 A | ||||
| In-rush current, after five-second power cycle | 14 A | ||||
| Power consumption, 1/8 maximum output power | 840 W | ||||
| Protection | Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/Under voltage Protection | ||||
| Electromagnetical environment | E1, E2, E3 | ||||
| Cooling | Front-to-Rear, temperature controlled fans | ||||
| Operating temperature | +5° to +40° C | ||||
| Safety class | I | ||||
| Product dimensions (Width xHeight x Depth) | 483 x 88.1 x 420.8 mm | ||||
| Net weight | 11.1 kg | ||||
Downloads
Let's talk
Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Warranty & After Sales Programs
Compatible Products
