DPM 8016
Digital matrix manager
DPM 8016 - Digital Matrix Manager for PROMATRIX 8000 Systems, with integrated controller and flexible matrix, can have up to 16 audio inputs and 16 audio outputs. The incorporated micro processor allows for 24 bit audio signal processing, resulting into an SNR of > 107 dB.
Eight slots on the rear of the device provide the familiar and comfortable modular setup hardware-wise.
IRIS-Net software does so accordingly by offering a multitude of individually configurable DSP blocks.
产品规格
| DPM 8016 System Controller | Modular PROMATRIX 8000 system manager including signal processing, routing, system control & supervision | |||
| Audio | 16 audio channels 8 audio slots, modular2-channel input & output cards | |||
| Networking | Module slot for optional Cobra Netinterface 16 I/O audio | |||
Specifications |
||||
| Safety/redundancy | Internal supervision, system monitoring, watchdog, fault output Redundant audio network possible | |||
| PC configuration & control software | IRIS-Net – Intelligent Remote &Integrated Supervision Integration of DPM 8016, amplifiers, call stations, & peripheral control Configuration, control, andsupervision for complete audiosystems Programmable user control panels & access levels | |||
| Audio input specifications | See technical specifications of used input module | |||
| Audio output specifications | See technical specifications of used output module | |||
| Frequency response | 20 Hz to 20 kHz (-0.5 dB) | |||
| THD+N | < 0.01% | |||
| Crosstalk | < 100 dB @ 1 kHz | |||
| Sample rate | 48 kHz | |||
| DSP processing resolution | 24-bit linear A/D & D/A conversion, 48-bit processing | |||
| Signal processing | 3 DSPs (480 MIPS) internal, DSPextension module optional | |||
| Ethernet | 10/100 MB, RJ-45 (PC control) | |||
| CAN | 10 to 500 kbit/s, 2 x RJ-45(remote amp control) | |||
| RS-232 | 2 ports, 9-pin DSUB female(remote control) | |||
| USB | USB type B on front panel (PCcontrol) | |||
| Control port | 2 x 12-pin connector 1 slave clock output (max. 1 A) 1 time sync input (DCF-77 standard, for receiver NRS90193)8 control inputs (analog 0-10 V/logic control) 6 control outputs (open collector, max. 60 V/1 A)1 ready/fault output (NO/NC relaycontacts, max. 30 V/1 A)3 reference outputs (+10 V,100 mA/+24 V, 200 mA/GND) | |||
| Power supply | +24 V DC (wide range tolerance: 18 V to 58 V DC) | |||
| Power consumption | 6 to 550 W (depending oninstalled modules & periphery) | |||
| Supply current (without modules) | Standby: 0.165 A, idle: 0.165 A,announcement: 0.300 A, alarm:0.300 A | |||
| Cooling | Fan, left-to-right | |||
| Operating temperature | -5 °C to +45 °C | |||
| Electromagnetic environment | E1, E2, E3 | |||
| Product dimensions (Width byHeight by Depth) | 19”, 2 HU, 483 x 88 x 376 mm | |||
| Net weight | DPM 8016 (without optionalmodules): 7.25 kgDPM UI-1 Universal Input Module: 100 g DPM AO-1 Analog Output Module:100 g CM-1 CobraNet Module: 75 g | |||
下载
Technical Documentations
Engineering Data Sheet
Manual
Other Documentation
| Name | Language & Download |
|---|---|
| PROMATRIX 8000 Network Configuration Guide | EN |
| PROMATRIX 8000 Netzwerk-Konfigurationsanleitung | DE |
Software, Firmware & Design Tools
Firmware
Let's talk
Dynacord & Electro-Voice, together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
售后及相关政策
