Install amplifiers
Models
 |
 |
 |
 |
 |
 |
 |
 | |
IPX20:4 |
IPX10:4 |
IPX10:8 |
IPX5:4 |
C1300FDi |
C1800FDi |
C2800FDi |
C3600FDi | |
| Maximum Output Power, Single Channel @ 2Ω | ||||||||
| Maximum Output Power, Single Channel | 2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) High impedance = 70V Operation = 1 x 625W (Bridge Mode) | 2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W | 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; | 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W | ||||
| Maximum Output Power, Dual Channel | 2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance) | Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 2500W (-1.5 dB); | Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W (-3.0 dB) | Load Impedance= 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W; 100 V Operation=2 x 2500 W | ||||
| Maximum Output Power, Bridged | High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W; | Load Impedance= 4Ω=2800W; 8Ω=1700W; 100V Operation=1x 1250W | Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended | Load Impedance= 4Ω=6000 W; 8Ω=3400 W; High Impedance= Not Recommended | ||||
| Maximum RMS Voltage Swing, THD = 1%, 1kHz | 55.3V | 65.1V | 78.8V | 90.6V | ||||
| Voltage Gain ref.1kHz | 32.0dB | 32.0dB | 32.0dB | 32.0dB | ||||
| Voltage Gain, ref. 1 kHz | ||||||||
| IMD-SMPTE, 60 Hz, 7 kHz | < 0.1% | <0.1% | <0.1% | <0.1% | ||||
| DIM 30 | < 0.05% | <0.05% | <0.05%% | <0.05% | ||||
| Maximum Input Level | +21 dBu | +21dBu | +21dBu | +21 dBu | ||||
| Max. Input Level | ||||||||
| Crosstalk | < -80dB | < -80dB | < -80dB | < -80dB | ||||
| Frequency Response, ref 1 kHz, 8 Ω Load | ||||||||
| Frequency Response, ref. 1 kHz, 8 Ω Load | ||||||||
| Frequency Response | 10 Hz to 21 kHz (±1 dB) | 10 Hz to 21 kHz (±1 dB) | 10 Hz to 21 kHz (±1 dB) | 10 Hz to 21 kHz (±1 dB) | ||||
| Input Impedance, active balanced | 20kΩ | 20kΩ | 20kΩ | 20kΩ | ||||
| Signal-to-Noise Ratio (A-weighted) | >104dB | >105dB | >107dB | >109dB | ||||
| Output Noise , A-weighted | < -68dBu | <-68dBu | <-68dBu | <-68dBu | ||||
| Output Stage Topology | Class AB | Class AB | Class H | Class H | ||||
| Power Requirement | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | ||||
| Power Consumption | 550 W | 700W | 700W | 850 W | ||||
| Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | ||||
| Cooling | Front-to-rear, 3-stage-fans | Front-to-rear, 3-stage-fans | Front-to-rear, 3-stage-fans | Front-to-rear, 3-stage-fans | ||||
| Safety Class | I | I | I | I | ||||
| Available Color | Black | Black | Black | Black | ||||
| Height | 3.46" (88mm) | 3.46" (88mm) | 3.46" (88mm) | 3.46" (88mm) | ||||
| Width | 19.02" (483mm) | 19.02" (483mm) | 19.02" (483mm) | 19.02" (483mm) | ||||
| Depth | 18.2" (462.4mm) | 18.2" (462.4mm) | 18.2" (462.4mm) | 18.2" (462.4mm) | ||||
| Weight Net | 28.44lbs (12.9kg) | 33.51lbs (15.2kg) | 35.71lbs (16.2kg) | 40.12lbs (18.2kg) | ||||
| Signal Processing | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | ||||
| Channels | ||||||||
| High Impedance Operation | 70V (in bridged mode) | 70 V (dual channel), 100 V (bridged) | 70 V, 100 V (dual channel & bridged) | 70V Operation & 100V Operation | ||||
| Remote control | SONICUE sound system software (requires firmware 2.0) | SONICUE sound system software (requires firmware 2.0) | SONICUE sound system software (requires firmware 2.0) | SONICUE sound system software (requires firmware 2.0) | ||||
| Remote Power ON/GPIO | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection | |||||
| Direct Drive Load Capability | Dual Channel: Not Available Bridge Mode 70V Operatoin: 1 x 625 w (0.0 dB) Bridge Mode 100V Operation: Not Available | Dual Channel 70V Operation: 2 x 1250 W (-1.5 dB) Dual Channel 100V Operation: Not available Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 2 x 1250 W (-1.5 dB) | Dual Channel 70V Operation: 2 x 1250 W (0.0 dB) Dual Channel 100V Operation: 2 x 2500 W (-3.0 dB) Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 1 x 1250 W (0.0 dB) | Dual Channel 70V Operation: Not recommended Dual Channel 100V Operation: 2 x 2500 W (-1.5 dB) Bridge Mode: Not recommended | ||||
| Dimensions | ||||||||
| Total Harmonic Distortion | < 0.05% | <0.05% | < 0.05% | <0.05% | ||||
| Input Sensitivity, Rated Output Power @ 4 Ω, 1 kHz | ||||||||
| Max. Bridged Output Power, THD = 1%, 1 kHz | ||||||||
| Maximum Midband Output Power, 1 kHz, THD = 1%, 4 Channels at 2Ω | ||||||||
| Max. Midband Output Power, THD = 1%, 1 kHz, 4 Channels driven | ||||||||
| Operating Temperature Range | +5°C to +40°C (40°F to +105°F) | +5°C to +40°C (40°F to +105°F) | +5°C to +40°C (40°F to +105°F) | +5°C to +40°C (40°F to +105°F) | ||||
| Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More |
Show more specs
Downloads
Technical Documentations
A/E Specification
Certification
Engineering Data Sheet
| Name | Language & Download |
|---|---|
| C1300FDi Engineering Data Sheet | EN DE ES FR IT JA KO PT RU TR ZH |
| C1800FDi Engineering Data Sheet | EN DE ES FR IT JA KO PT RU TR ZH |
| C2800FDi Engineering Data Sheet | EN DE ES FR IT JA KO PT RU TR ZH |
| C3600FDi Engineering Data Sheet | EN DE ES FR IT JA KO PT RU TR ZH |
| IPX10:4 Engineering Data Sheet | EN DE ES FR IT JA KO PT TR ZH |
| IPX10:8 Engineering Data Sheet | EN DE ES FR IT PT TR ZH |
| IPX20:4 Engineering Data Sheet | EN DE ES FR IT KO PT TR ZH |
| IPX5:4 Engineering Data Sheet | EN DE ES FR IT JA KO PT TR ZH |
Manual
| Name | Language & Download |
|---|---|
| IPX Series Manual | ES PT |
| L Series & C Series Manual | EN DE ES FR IT JA KO PT RU TR ZH |
| IPX Series DSP Multichannel Networking Power Amplifier | DE IT TR ZH |
| How to upgrade Dynacord L- and C Series firmware | EN |
| IPX Series Installation Manual | EN |
| Mains Operation & Resulting Temperature Table & Mains Fusing IPX-Series Amplifiers | EN |
| MARC 1.0.1 ReadMe | EN |
| MARC Quick Start Guide | EN |
| IPX Series Guide | FR |
| IPX Series マニュアル | JA |
| IPX Series 설치 매뉴얼 | KO |
Other Documentation
Service Policies
White Paper
| Name | Language & Download |
|---|---|
| Dynacord C series amplifiers for direct drive | EN |
Software, Firmware & Design Tools
Drawing
| Name | Language & Download |
|---|---|
| C Series CAD Drawing | Download |
| IPX Series CAD Drawing | Download |
Firmware
| Name | Language & Download |
|---|---|
| L & C Series amp firmware 1.2.4 | Download |
Marketing Materials
Brochure
Product Image
Warranty & After Sales Programs