Install amplifiers
Models
C1300FDi
DSP 2 x 650 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel
2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) High impedance = 70V Operation = 1 x 625W (Bridge Mode)
Maximum Output Power, Dual Channel
2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance)
Maximum Output Power, Bridged
High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W;
Maximum RMS Voltage Swing, THD = 1%, 1kHz
55.3V
Voltage Gain ref.1kHz
32.0dB
IMD-SMPTE, 60 Hz, 7 kHz
< 0.1%
DIM 30
< 0.05
Maximum Input Level
+21 dBu
Crosstalk
-80
Frequency Response
10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced
20kΩ
Signal-to-Noise Ratio (A-weighted)
>104
Output Noise , A-weighted
< -68dBu
Output Stage Topology
Class AB
Power Requirement
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption
550 W
Protection
Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling
Front-to-rear, 3-stage-fans
Safety Class
I
Available Color
Black
Height
88
Width
483
Depth
462.4
Weight Net
12.9
Signal Processing
FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
High Impedance Operation
70V (in bridged mode)
Remote Power ON/GPIO
Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Remote control
SONICUE sound system software (requires firmware 2.0)
Direct Drive Load Capability
Dual Channel: Not Available Bridge Mode 70V Operatoin: 1 x 625 w (0.0 dB) Bridge Mode 100V Operation: Not Available
Total Harmonic Distortion
< 0.05
Operating Temperature Range
+5°C to +40°C (40°F to +105°F)
C1800FDi
DSP 2 x 950 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel
2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W
Maximum Output Power, Dual Channel
Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 2500W (-1.5 dB);
Maximum Output Power, Bridged
Load Impedance= 4Ω=2800W; 8Ω=1700W; 100V Operation=1x 1250W
Maximum RMS Voltage Swing, THD = 1%, 1kHz
65.1V
Voltage Gain ref.1kHz
32.0dB
IMD-SMPTE, 60 Hz, 7 kHz
<0.1%
DIM 30
<0.05
Maximum Input Level
+21dBu
Crosstalk
-80
Frequency Response
10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced
20kΩ
Signal-to-Noise Ratio (A-weighted)
>105
Output Noise , A-weighted
<-68dBu
Output Stage Topology
Class AB
Power Requirement
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption
700W
Protection
Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling
Front-to-rear, 3-stage-fans
Safety Class
I
Available Color
Black
Height
88
Width
483
Depth
462.4
Weight Net
15.2
Signal Processing
FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
Total Harmonic Distortion
<0.05
Operating Temperature Range
+5°C to +40°C (40°F to +105°F)
High Impedance Operation
70 V (dual channel), 100 V (bridged)
Remote Power ON/GPIO
Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Remote control
SONICUE sound system software (requires firmware 2.0)
Direct Drive Load Capability
Dual Channel 70V Operation: 2 x 1250 W (-1.5 dB) Dual Channel 100V Operation: Not available Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 2 x 1250 W (-1.5 dB)
C2800FDi
DSP 2 x 1400 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel
2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W;
Maximum Output Power, Dual Channel
Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W (-3.0 dB)
Maximum Output Power, Bridged
Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended
Maximum RMS Voltage Swing, THD = 1%, 1kHz
78.8V
Voltage Gain ref.1kHz
32.0dB
IMD-SMPTE, 60 Hz, 7 kHz
<0.1%
DIM 30
<0.05%
Maximum Input Level
+21dBu
Crosstalk
-80
Frequency Response
10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced
20kΩ
Signal-to-Noise Ratio (A-weighted)
>107
Output Noise , A-weighted
<-68dBu
Output Stage Topology
Class H
Power Requirement
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption
700W
Protection
Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling
Front-to-rear, 3-stage-fans
Safety Class
I
Available Color
Black
Height
88
Width
483
Depth
462.4
Weight Net
16.2
Signal Processing
FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
Operating Temperature Range
+5°C to +40°C (40°F to +105°F)
Remote control
SONICUE sound system software (requires firmware 2.0)
Direct Drive Load Capability
Dual Channel 70V Operation: 2 x 1250 W (0.0 dB) Dual Channel 100V Operation: 2 x 2500 W (-3.0 dB) Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 1 x 1250 W (0.0 dB)
High Impedance Operation
70 V, 100 V (dual channel & bridged)
Remote Power ON/GPIO
Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Total Harmonic Distortion
< 0.05
C3600FDi
DSP 2 x 1800 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel
2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W
Maximum Output Power, Dual Channel
Load Impedance= 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W; 100 V Operation=2 x 2500 W
Maximum Output Power, Bridged
Load Impedance= 4Ω=6000 W; 8Ω=3400 W; High Impedance= Not Recommended
Maximum RMS Voltage Swing, THD = 1%, 1kHz
90.6V
Voltage Gain ref.1kHz
32.0dB
IMD-SMPTE, 60 Hz, 7 kHz
<0.1%
DIM 30
<0.05
Maximum Input Level
+21 dBu
Crosstalk
-80
Frequency Response
10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced
20kΩ
Signal-to-Noise Ratio (A-weighted)
>109
Output Noise , A-weighted
<-68dBu
Output Stage Topology
Class H
Power Requirement
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption
850 W
Protection
Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling
Front-to-rear, 3-stage-fans
Safety Class
I
Available Color
Black
Height
88
Width
483
Depth
462.4
Weight Net
18.2
Signal Processing
FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
Operating Temperature Range
+5°C to +40°C (40°F to +105°F)
Remote control
SONICUE sound system software (requires firmware 2.0)
High Impedance Operation
70V Operation & 100V Operation
Direct Drive Load Capability
Dual Channel 70V Operation: Not recommended Dual Channel 100V Operation: 2 x 2500 W (-1.5 dB) Bridge Mode: Not recommended
Total Harmonic Distortion
<0.05
DSA 8204
2 x 450 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel @ 2Ω
450
Channels
2
DSA 8206
2 x 600 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel @ 2Ω
600
Channels
2
DSA 8209
2 x 900 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel @ 2Ω
900
Channels
2
DSA 8212
2 x 1200 w power amplifier for fixed install applications
-
Maximum Output Power, Single Channel @ 2Ω
1200
Channels
2
DSA 8405
4 x 500 w multichannel power amplifier for fixed install applications
-
Voltage Gain, ref. 1 kHz
32,0dB - 36,0dB
Max. Input Level
+22dBu (9,76Vrms)
Frequency Response, ref 1 kHz, 8 Ω Load
15Hz…30kHz (±1dB)
Output Stage Topology
Class D
Weight Net
11.1
Channels
4
Dimensions
483 x 88.1 x 420.8 mm
Input Sensitivity, Rated Output Power @ 4 Ω, 1 kHz
1.1V (+3.0dBu)
Max. Bridged Output Power, THD = 1%, 1 kHz
1000W
Maximum Midband Output Power, 1 kHz, THD = 1%, 4 Channels at 2Ω
500W
DSA 8410
4x 1000 w multichannel power amplifier for fixed install applications
-
Maximum Output Power, Single Channel @ 2Ω
1000
Voltage Gain, ref. 1 kHz
32,0dB - 36,0dB
Max. Input Level
+22dBu (9,76Vrms)
Frequency Response, ref. 1 kHz, 8 Ω Load
15Hz…30kHz (±1dB)
Output Stage Topology
Class D
Weight Net
11.1
Channels
4
Dimensions
483 x 88.1 x 420.8 mm
Input Sensitivity, Rated Output Power @ 4 Ω, 1 kHz
1.55V (+6.0dBu)
Max. Bridged Output Power, THD = 1%, 1 kHz
2000W
Max. Midband Output Power, THD = 1%, 1 kHz, 4 Channels driven
900W
DSA 8805
8 x 500 w multichannel power amplifier for fixed install applications
-
Maximum Output Power, Single Channel @ 2Ω
500
Voltage Gain, ref. 1 kHz
32,0dB - 36,0dB
Max. Input Level
+22dBu (9,76Vrms)
Frequency Response, ref. 1 kHz, 8 Ω Load
15Hz…30kHz (±1dB)
Output Stage Topology
Class D
Weight Net
13.9
Input Sensitivity, Rated Output Power @ 4 Ω, 1 kHz
32dB (1.1V (+3.0 dBu)
Max. Bridged Output Power, THD = 1%, 1 kHz
1000W
Channels
8
Dimensions
483 x 88.1 x 420.8 mm
Max. Midband Output Power, THD = 1%, 1 kHz, 4 Channels driven
500W
IPX20:4 |
IPX10:4 |
IPX10:8 |
IPX5:4 |
C1300FDiDSP 2 x 650 w power amplifier for fixed install applications |
C1800FDiDSP 2 x 950 w power amplifier for fixed install applications |
C2800FDiDSP 2 x 1400 w power amplifier for fixed install applications |
C3600FDiDSP 2 x 1800 w power amplifier for fixed install applications |
RCM-810 |
DSA 8204 |
DSA 8206 |
DSA 8209 |
DSA 8212 |
DSA 84054 x 500 w multichannel power amplifier for fixed install applications |
DSA 84104x 1000 w multichannel power amplifier for fixed install applications |
DSA 88058 x 500 w multichannel power amplifier for fixed install applications |
PCL 1125T |
PCL 1225T |
PCL 1240T |
PCL 1245 |
PCL 1415 | |
Maximum Output Power, Single Channel | 2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) High impedance = 70V Operation = 1 x 625W (Bridge Mode) | 2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W | 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; | 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W | |||||||||||||||||
Maximum Output Power, Single Channel @ 2Ω | 450Watts | 600Watts | 900Watts | 1200Watts | 1000Watts | 500Watts | |||||||||||||||
Maximum Output Power, Dual Channel | 2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance) | Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 2500W (-1.5 dB); | Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W (-3.0 dB) | Load Impedance= 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W; 100 V Operation=2 x 2500 W | |||||||||||||||||
Maximum Output Power, Bridged | High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W; | Load Impedance= 4Ω=2800W; 8Ω=1700W; 100V Operation=1x 1250W | Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended | Load Impedance= 4Ω=6000 W; 8Ω=3400 W; High Impedance= Not Recommended | |||||||||||||||||
Maximum RMS Voltage Swing, THD = 1%, 1kHz | 55.3V | 65.1V | 78.8V | 90.6V | |||||||||||||||||
Voltage Gain ref.1kHz | 32.0dB | 32.0dB | 32.0dB | 32.0dB | |||||||||||||||||
Voltage Gain, ref. 1 kHz | 32,0dB - 36,0dB | 32,0dB - 36,0dB | 32,0dB - 36,0dB | ||||||||||||||||||
IMD-SMPTE, 60 Hz, 7 kHz | < 0.1% | <0.1% | <0.1% | <0.1% | |||||||||||||||||
DIM 30 | < 0.05% | <0.05% | <0.05%% | <0.05% | |||||||||||||||||
Max. Input Level | +22dBu (9,76Vrms) | +22dBu (9,76Vrms) | +22dBu (9,76Vrms) | ||||||||||||||||||
Maximum Input Level | +21 dBu | +21dBu | +21dBu | +21 dBu | |||||||||||||||||
Crosstalk | < -80dB | < -80dB | < -80dB | < -80dB | |||||||||||||||||
Frequency Response | 10 Hz to 21 kHz (±1 dB) | 10 Hz to 21 kHz (±1 dB) | 10 Hz to 21 kHz (±1 dB) | 10 Hz to 21 kHz (±1 dB) | |||||||||||||||||
Frequency Response, ref. 1 kHz, 8 Ω Load | 15Hz…30kHz (±1dB) | 15Hz…30kHz (±1dB) | |||||||||||||||||||
Frequency Response, ref 1 kHz, 8 Ω Load | 15Hz…30kHz (±1dB) | ||||||||||||||||||||
Input Impedance, active balanced | 20kΩ | 20kΩ | 20kΩ | 20kΩ | |||||||||||||||||
Signal-to-Noise Ratio (A-weighted) | >104dB | >105dB | >107dB | >109dB | |||||||||||||||||
Output Noise , A-weighted | < -68dBu | <-68dBu | <-68dBu | <-68dBu | |||||||||||||||||
Output Stage Topology | Class AB | Class AB | Class H | Class H | Class D | Class D | Class D | ||||||||||||||
Power Requirement | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) | |||||||||||||||||
Power Consumption | 550 W | 700W | 700W | 850 W | |||||||||||||||||
Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay | |||||||||||||||||
Cooling | Front-to-rear, 3-stage-fans | Front-to-rear, 3-stage-fans | Front-to-rear, 3-stage-fans | Front-to-rear, 3-stage-fans | |||||||||||||||||
Safety Class | I | I | I | I | |||||||||||||||||
Available Color | Black | Black | Black | Black | |||||||||||||||||
Height | 88mm (3.46") | 88mm (3.46") | 88mm (3.46") | 88mm (3.46") | |||||||||||||||||
Width | 483mm (19.02") | 483mm (19.02") | 483mm (19.02") | 483mm (19.02") | |||||||||||||||||
Depth | 462.4mm (18.2") | 462.4mm (18.2") | 462.4mm (18.2") | 462.4mm (18.2") | |||||||||||||||||
Weight Net | 12.9kg (28.44 lbs) | 15.2kg (33.51 lbs) | 16.2kg (35.71 lbs) | 18.2kg (40.12 lbs) | 11.1kg (24.47 lbs) | 11.1kg (24.47 lbs) | 13.9kg (30.64 lbs) | ||||||||||||||
Signal Processing | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance | |||||||||||||||||
Channels | 2 | 2 | 2 | 2 | 4 | 4 | 8 | ||||||||||||||
Dimensions | 483 x 88.1 x 420.8 mm | 483 x 88.1 x 420.8 mm | 483 x 88.1 x 420.8 mm | ||||||||||||||||||
High Impedance Operation | 70V (in bridged mode) | 70 V (dual channel), 100 V (bridged) | 70 V, 100 V (dual channel & bridged) | 70V Operation & 100V Operation | |||||||||||||||||
Operating Temperature Range | +5°C to +40°C (40°F to +105°F) | +5°C to +40°C (40°F to +105°F) | +5°C to +40°C (40°F to +105°F) | +5°C to +40°C (40°F to +105°F) | |||||||||||||||||
Input Sensitivity, Rated Output Power @ 4 Ω, 1 kHz | 1.1V (+3.0dBu) | 1.55V (+6.0dBu) | 32dB (1.1V (+3.0 dBu) | ||||||||||||||||||
Remote Power ON/GPIO | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection | ||||||||||||||||||
Remote control | SONICUE sound system software (requires firmware 2.0) | SONICUE sound system software (requires firmware 2.0) | SONICUE sound system software (requires firmware 2.0) | SONICUE sound system software (requires firmware 2.0) | |||||||||||||||||
Max. Bridged Output Power, THD = 1%, 1 kHz | 1000W | 2000W | 1000W | ||||||||||||||||||
Direct Drive Load Capability | Dual Channel: Not Available Bridge Mode 70V Operatoin: 1 x 625 w (0.0 dB) Bridge Mode 100V Operation: Not Available | Dual Channel 70V Operation: 2 x 1250 W (-1.5 dB) Dual Channel 100V Operation: Not available Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 2 x 1250 W (-1.5 dB) | Dual Channel 70V Operation: 2 x 1250 W (0.0 dB) Dual Channel 100V Operation: 2 x 2500 W (-3.0 dB) Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 1 x 1250 W (0.0 dB) | Dual Channel 70V Operation: Not recommended Dual Channel 100V Operation: 2 x 2500 W (-1.5 dB) Bridge Mode: Not recommended | |||||||||||||||||
Max. Midband Output Power, THD = 1%, 1 kHz, 4 Channels driven | 900W | 500W | |||||||||||||||||||
Total Harmonic Distortion | < 0.05% | <0.05% | < 0.05% | <0.05% | |||||||||||||||||
Maximum Midband Output Power, 1 kHz, THD = 1%, 4 Channels at 2Ω | 500W | ||||||||||||||||||||
Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More | Learn More |
Show more specs
Downloads
Warranty & After Sales Programs